| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Suspension | Section: Front Suspension | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002YGA004X |
| Title: FRONT SUSPENSION: FRONT SHOCK ABSORBER: DISASSEMBLY (2008 Sequoia) | ||
DISASSEMBLY
1. REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT
(a) Using SST, compress the coil spring.
SST: 09727-30021
NOTICE:
- Make sure that the suspension support is free from the coil spring.
- Do not compress the coil spring more than necessary.
- Do not use an impact wrench. It will damage SST.
- Do not place yourself over the top of the shock absorber.
CAUTION:
Be careful as the coil spring may spring upward and cause an injury.
|
(b) Remove the front support to front shock absorber nut. |
2. REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH
(a) Remove the suspension support, 2 retainers and 2 cushions from the shock absorber rod (w/o AVS).
(b) Remove the suspension support, 2 retainers, 2 cushions and collar from the shock absorber rod (w/AVS).
3. REMOVE FRONT COIL SPRING LH
(a) Remove the coil spring from the shock absorber.
|
|